+
Add to Wishlist
Add to Wishlist

MuchBoost B57D30 Upgraded Turbocharger with a Custom Billet Compressor Wheel and Enlarged Turbine Wheel. It is based on an original Honeywell GTD2056VZK & GTB2260VK turbochargers, which means that the installation is 100%P&P. The turbocharger is meant to work with BMW 530d, 630d, 730d, X3 with the B57D30 210-265HP engines.

The turbo delivers up to 190% power (190 extra HP) over the factory specs. It is a great choice for someone looking for a bit extra HP from their daily driver. MuchBoost turbo allows you to get more from your engine and enjoy it even more than you’ve been so far.

We have developed 2 modification options that allow you to reach anywhere from 400HP to 450HP.

MuchBoost B57D30 400

Upgraded turbocharger with an estimated ~400HP at the crank. List of modifications:

  • Precisely machined seal plates and compressor housing,
  • Genuine Honeywell compressor housing,
  • Genuine Honeywell bearing housing,
  • Genuine Honeywell exhaust manifold,
  • Upgraded journal bearings system that allows the turbo to hold more boost,
  • Genuine Hella electronic actuator
  • More efficient and larger Billet Compressor Wheel GEN II,
  • High-Flow 9 Blades GTD22VZ genuine Turbine Wheel,
  • Dynamically balanced,
  • Perfectly calibrated VNT system + dynamically balanced. We use a modern VISCOM flow bench and Schenck balancing machines,
  • The compressor and turbine wheels are balanced separately, and then the whole core is high-speed balanced using VSR balancing machines at speeds similar to the level seen in the vehicle.
MuchBoost B57D30 450

Upgraded turbocharger with an estimated potential of ~450HP at the crank. Modifications compared to the 360 option are the same except:

  • Bigger Compressor Billet Wheel 11+0 Blades,
  • Enlarged High-Flow 9 Blades  Turbine Wheel,
  • Precisely machined exhaust housing.
Other significant modifications

The turbo is meant to work with ~400-450HP In order to reach that level of power, you need to adjust your fuel, exhaust, and cooling systems as well.

Example project

One of our clients managed to produce 450HP and 815Nm of torque with our turbo. Dyno graph below:

Another example of our turbo making great power. This time it managed to produce 440HP and 790Nm of torque. The car was also equipped with:

Modified exhaust,
DPF-delete,
Wagnertuning Intercooler,
Stage 3 ECU and TCU tunes by a2performance.

Dyno graph below:


A set of gaskets is included with every option you choose!


Cars
BMW 530d G30 xDrive 265HP
BMW 530d G31 xDrive 265HP
BMW 630d GT G32 xDrive 265HP
BMW 730d G11 xDrive 265HP
BMW 730d G12 xDrive 210HP
BMW X3 G01 30dx 265HP
BMW X7 G07 30d 265HP


Factory numbers

835109
835109-0009
835109-0010
835109-0012

Engines

B57D30


OEM number

8584218
8584219


(If your engine has a different code, please send us a message. We will verify it.)


Matters you should be aware of when placing your order.
    1. The warranty is 12 months without the limit of mileage.
    2. We need about 7 working days to perform and ship the upgraded turbocharger. The parcels in European Union are shipped via DPD for just 25,00 EURO. DHL Express (airplane shipping)  is used for orders besides the EU, it costs 99,00 EURO. The average delivery time is 2-4 working days. 
    3. Every parcel is fully insured.
    4. If you didn`t find the turbo you need, feel free to contact us. We are able to perform many more upgraded turbochargers than you can find on the site. Our development department works permanently on the new models.
    5. Do you have a workshop, are you an influencer or seller of tuning parts? We are open to cooperation by offering discounts and refunds.
    6. During placing your order, please provide information as follows:
    • the engine code,
    • the car model,
    • the stock power,
    • the VIN number

These details are helpful to make the turbo correctly.

POWER RANGE

400HP, 450HP

There are no reviews yet.

Be the first to review “B57D30 Hybrid Turbo Upgrade 3.0d BMW 30D G30 630D G32 730D G11”

You May Also Like