Custom Downpipe Kit for i.a. Volkswagen Golf VII R with 2.0 TFSI engine unit and the stock power of 300hp, Audi S3 8V with 2.0 TFSI  engine, Seat Leon Cupra III ST with 2.0 TFSI, and most of the 2.0 TFSI EA888 GEN3 VW engines.

You can choose between De-Cat Downpipe and a Race Cat Downpipe (100 CPSI / 200 CPSI).

Every part of this racing focused downpipe replacement is produced using CNC technology and is fully made out of Acid-Resistant Steel. If you choose a De-Cat Version, which doesn’t include the Catalytic Converter (CAT), you will significantly reduce the back pressure which leads to faster spool, an increase of power and more aggressive exhaust sound. The Race Cat version also offers huge flow improvement over the stock catalyst, which is the cause of very significant flow resistance. The bigger the diameter of the downpipe, the easier and quicker the turbocharger is able to lead off the exhaust gas. The design of the MuchBoost downpipe is optimized for minimization of variances in cross section area in order to get smooth exhaust gas flow and top performance.
Because a downpipe connects a turbocharger and the catback exhaust, its upgrade is often required for the upgraded turbo to unleash its full power. This upgrade ensures your turbo’s potential is not wasted, it is also a great choice cost-wise!

Most important features

1. The downpipe parts are CNC produced, ensuring precise, high quality elements.
2. The 3-inch (76mm) pipe diameter (diameter at the point of connection with the middle section 2.5-inch (65mm).
3. Removed Catalytic Converter, there is also an option to put race cat for this downpipe!
4. It is made fully out of Acid-Resistant Steel to ensure long life despite being exposed to toxic exhaust gases.
5. There is 1 socket for lambda sensors on the assembly.
6. The shape and mounting points fit with the original car parts, no additional work is needed!
7. Clean, strong and attractive welds, inside and out!
8. 100% Plug and Play.
9. Limited 2 years warranty.
10. ECU tune is necessary to avoid the Check Engine Light.

Performance advantages

1. Lowers exhaust temperature, so the charger and the exhaust manifold are more protected.
2. The highest levels of performance and greater reliability under constant high load conditions.
3. Allows for smooth flow of the exhaust gases, giving your engine extra power, as well as sharper throttle response!
4. Lighter than OEM.

Compatible car models

Volkswagen Golf VII R 2.0 TFSI AWD 4MOTION 5G 300HP
Volkswagen Golf VII R 2.0 TFSI AWD 4MOTION 5G 310HP
Volkswagen Passat B8 2.0 TFSI AWD 4MOTION 3G 280HP
Audi A3 Sedan (USA) 2.0 TFSI 8V 220HP
Audi S3 8V 2.0 TFSI 300HP
Audi S3 8V 2.0 TFSI 310HP
Skoda Superb Mk3 2.0 TFSI AWD 3V 280HP
Seat Leon Cupra III ST 2.0 TFSI AWD 5F 300HP

It is compatible with engines: CJXC, CJXA, CJXE, CHHB, CXDA.

You might also consider

MQB IS38 Hybrid Turbo Upgrade VW Golf VII R, Seat Leon Cupra, Audi S3 8V

Catalyst information

For downpipes without catalytic converter or with 100/200-cell catalytic converter, if the second post-catalytic lambda sensor exists, the control unit may display an error message. This does not rectrict driving operation, because first lambda sensor is present for the motor control. The second lambda sensor is only used to monitor the catalyst’s effectiveness, and this check can be programmed out through modifying the chip’s software.
Most of the cars up to Euro 3 Emissioncode do not have post-cat sensors, therefore require no adjustments to avoid the alarm.
In case of catalytic converters, the washcoat content is significantly increased and has a very high oxygen storage capacity. This means, that errors can be avoided. While the EOBD Catalysts are tested up to Euro 4, their durability and use up to Euro 6 is given.
In case of Euro 5 and 6 vehicles, a catalyst with ECE selection is needed, to avoid the above points.
MuchBoost sportcats run a 100 or 200-cell high flow cat which passes road legal emissions tests, while de-cat pipes are for RACE USE ONLY and are NOT road legal.

Delivery

We need usually ~ 14 working days to perform and send this KIT.