MuchBoost 3.0TDI CL/CT/CV Upgraded Turbocharger with a Custom Billet Compressor Wheel and Enlarged Turbine Wheel. It is based on an original Garrett Turbocharger, which means that the installation is 100%P&P. The turbocharger is meant to work with Audi A6, A8, Q7,  VW Touareg, Porsche Cayenne, and others with the 3.0TDI CL/CT/CV 204-262HP engines.

The turbo delivers up to 196% power (196 extra HP) over the factory specs. It is a great choice for someone looking for a bit extra HP from their daily driver. MuchBoost turbo allows you to get more from your engine and enjoy it even more than you’ve been so far.

MuchBoost 3.0TDI CL/CT/CV 350

Upgraded turbocharger with an estimated potential ~350HP at the crank. The list of modifications:

• Fast spool thanks to Enlarged Custom 6+6 Blades Billet Compressor Wheel,
• Enlarged GTB22VZK Turbine Wheel,
• High air-fuel ratio including high peak torque achieved at low engine speeds.
• Genuine Garrett GTB20VZK compressor housing,
• Genuine Garrett GTB20VZK exhaust housing,
• Genuine Garrett GTB20VZK bearing housing,
• Precisely machined compressor housing, exhaust housing and seal plate,
• Upgraded Journal bearing system that allows holding more boost,
• Genuine Hella VNT actuator,
• Perfectly calibrated VNT system + dynamically balanced. We use a modern VISCOM flow bench and Schenck balancing machines,
• The compressor and turbine wheels are balanced separately, and then the whole core is high-speed balanced using VSR balancing machines at speeds similar to the level seen in the vehicle.

MuchBoost 3.0TDI CL/CT/CV 400

Upgraded turbocharger with an estimated potential ~400HP at the crank. Modifications compared to the 350 option are the same except:

• Enlarged Billet Compressor Wheel 11+0 blades,
• Enlarged High Flow  blades Turbine Wheel.

Other significant modifications

The turbo is meant to work with ~350-400HP In order to reach that level of power, you need to adjust your fuel, exhaust, and cooling systems as well.

Example project

One of our clients managed to get 343HP and 710Nm of torque (at 1.9Bar) with this turbo. Please take a look at the dyno graph below.

A set of gaskets is included with every option you choose!

(If your engine has a different code, please send us a message. We will verify it.)

Matters you should be aware of when placing your order.

1. 1. The warranty is 12 months without the limit of mileage.
   2. We need around 2 weeks to perform and ship the upgraded turbocharger. In some complicated cases, it may take up to 3 weeks. Please realize that the turbo upgrades require precision. Especially, the machining process takes a lot of time. We don`t cut the corners. Thank you for understanding. The parcels in the European Union are shipped via DPD for just 25,00 EURO. UPS is used for orders besides the EU, it costs 99,00 EURO and 49,00 to the UK (DHL). The average delivery time is 3-5 working days.
   3. Every parcel is fully insured.
   4. If you didn`t find the turbo you need, feel free to contact us. We are able to perform many more upgraded turbochargers than you can find on the site. Our development department works permanently on the new models.
   5. Do you have a workshop, are you an influencer or seller of tuning parts? We are open to cooperation by offering discounts and refunds.
   6. During placing your order, please provide information as follows:

• • the engine code,
  • the car model,
  • the stock power,
  • the VIN number

These details are helpful to make the turbo correctly.