MuchBoost 2.0 TFSI EA888 Gen 3 Upgraded Turbocharger with Custom Billet Compressor Wheel and enlarged Turbine Wheel. It is based on an original Continental Turbocharger, which means that the installation is 100%P&P. The turbocharger is meant to work with Audi A3 8V, TT 8S, Q2, Q3  F3, Seat Ateca, Leon III, Tarraco, Skoda Karoq, Kodaiq, Octavia III, VW Arteon, Passat B8, Golf VI GTI, T-Roc, and Tiguan II with the 2.0TFSI EA888 Gen 3 180-200HP engines.

The turbos deliver up to 194% power (170 extra HP) over the factory specs. It is a great choice for someone looking for a bit extra HP from their daily driver. MuchBoost turbo allows you to get more from your engine and enjoy it even more than you’ve been so far.

Main Features

• The potential ~350HP,
• Fast spool thanks to Custom Billet Compressor Wheel,
• Enlarged 9 blades Turbine Wheel,
• High air-fuel ratio including high peak torque achieved at low engine speeds.

Details on the construction of the turbo:

• Genuine Continentalcompressor housing,
• Genuine Continental exhaust manifold,
• Genuine Continental bearing housing,
• Genuine actuator,
• Precisely machined exhaust and compressor housings + seal plate,
• Upgraded Journal bearing system that allows holding more boost,
• The compressor and turbine wheels are balanced separately, and then the whole core is high-speed balanced using VSR balancing machines at speeds similar to the level seen in the vehicle.

Other significant modifications

The turbo is meant to work with ~350HP In order to reach that level of power, you need to adjust your fuel, exhaust, and cooling systems as well.

A set of gaskets is included with the turbo!

(If your engine has a different code, please send us a message. We will verify it.)

Matters you should be aware of when placing your order.

1. 1. The warranty is 12 months without the limit of mileage.
   2. We need around 2 weeks to perform and ship the upgraded turbocharger. In some complicated cases, it may take up to 3 weeks. Please realize that the turbo upgrades require precision. Especially, the machining process takes a lot of time. We don`t cut the corners. Thank you for understanding. The parcels in the European Union are shipped via DPD for just 25,00 EURO. UPS is used for orders besides the EU, it costs 99,00 EURO and 49,00 to the UK (DHL). The average delivery time is 3-5 working days.
   3. Every parcel is fully insured.
   4. If you didn`t find the turbo you need, feel free to contact us. We are able to perform many more upgraded turbochargers than you can find on the site. Our development department works permanently on the new models.
   5. Do you have a workshop, are you an influencer or seller of tuning parts? We are open to cooperation by offering discounts and refunds.
   6. During placing your order, please provide information as follows:

• • the engine code,
  • the car model,
  • the stock power,
  • the VIN number

These details are helpful to make the turbo correctly.