24 / 7 Support:
+48 604 472 340

If you love speed as we do then you are in great hands. We can build a turbocharger tailored to your needs. No strings attached!

Please review 4 stages of the upgrade we have in the offer:

Stage I Upgrade

  • journal bearings – so-called ‘360’
  • metalworking of bearing housing
  • metalworking of seal plate
  • metalworking of compressor housing
  • enlarged cast compressor wheel

Stage I Premium Upgrade

  • journal bearings – so-called ‘360’
  • metalworking of bearing housing
  • metalworking of seal plate
  • metalworking of compressor housing
  • enlarged aluminum Custom Compressor Billet Wheel

Stage II Upgrade

  • journal bearings – so-called ‘360’
  • metalworking of bearing housing
  • metalworking of seal plate
  • metalworking of compressor housing
  • enlarged cast compressor wheel
  • metalworking of turbine housing
  • enlarged cast turbine wheel

Stage III Upgrade

  • journal bearings – so-called ‘360’
  • metalworking of bearing housing
  • metalworking of seal plate
  • metalworking of compressor housing
  • metalworking of turbine housing
  • enlarged aluminum Custom Compressor Billet Wheel

When talking to Robert you get a sense of ease, and you can engage him in matters connected with the following themes:

“I need to choose an adequate booster for the make and model of the car I wish to tune up.”

“I have a non-standard job and need to calculate the modification parameters.”

Optional upgrades available for every Stage

Clipping with Lightening of Turbine Wheel

It’s a machining process that enables the turbocharger to increase power output by reducing the backpressure. During this process, some blade material from the turbine wheel is removed which results in a slight reduction in turbocharger response time.

Reinforced
actuator

Allows for higher boost pressure to be run. A stronger/uprated actuator means the turbocharger will achieve a higher boost before the wastegate opens usually delivering more power.

Custom
Upgrade

Define what you need and we will deliver! E.g. we can build a turbocharge from two separate stock ones. It’s a very common solution with the GTB2260VK/VKLR type of a turbo and VAG 1.9/2.0 TDI engine.

General
information

  • We can modify your turbo or use our own
  • Only new parts of highest quality are being used
  • To assure great and lasting performance of your car other parts of the engine need to be tuned apart from the turbocharger
  • We need on average 5 working days to build a turbo
  • 12 months guarantee

What do I do?

OK, so you have decided that you want one.  Send us a message including the following information:

  • car and engine you would like to get a turbo for,
  • the scope of changes you plan to do,
  • the power you aim for.
Euro