YD25DDTi Hybrid Turbo Upgrade 2.5DCI Nissan Navara, Pathfinder, Murano
1649,80 € – 1949,80 €
In Stock
MuchBoost 2.5DCI Upgraded Turbocharger with a Custom Billet Compressor Wheel 7+7/11+0 Blades, and Clipped and Lightened/Enlarged Turbine Wheel. It is based on an original KKK Turbocharger, which means that the installation is 100%P&P. The turbocharger is meant to work with Nissan Navara, Murano, and Pathfinder with the YD25DDTi 190HP engines.
The turbo delivers up to 157% power (110 extra HP) over the factory specs. It is a great choice for someone looking for a bit extra HP from their daily driver. MuchBoost turbo allows you to get more from your engine and enjoy it even more than you’ve been so far.
We have developed 2 modification options that allow you to reach anywhere from 250HP to 300HP.
MuchBoost YD25DDTi 250
Upgraded turbocharger with an estimated ~250HP at the crank. List of modifications:
- Precisely machined seal plates and compressor housing,
- Genuine KKK compressor housing,
- Genuine KKK bearing housing,
- Genuine KKK exhaust manifold,
- Upgraded journal bearings system that allows the turbo to hold more boost,
- Genuine Hella actuator
- More efficient and larger Billet Compressor Wheel 7+7 Blades GEN I,
- Clipped and Lightened genuine Turbine Wheel,
- Dynamically balanced,
- Perfectly calibrated VNT system + dynamically balanced. We use a modern VISCOM flow bench and Schenck balancing machines,
- The compressor and turbine wheels are balanced separately, and then the whole core is high-speed balanced using VSR balancing machines at speeds similar to the level seen in the vehicle.
MuchBoost YD25DDTi 300
Upgraded turbocharger with an estimated potential of ~300HP at the crank. Modifications compared to the 250 option are the same except:
- Bigger Compressor Billet Wheel 11+0 Blades,
- Larger Turbine Wheel,
- Precisely machined exhaust housing.
Other significant modifications
In order to reach that level of power, you need to adjust your fuel, exhaust, and cooling systems as well.
Example Project
One of our clients managed to get 241HP at the crank and 462Nm of torque with our turbo. Dyno sheet below:
A set of gaskets is included with every option you choose!
Cars
Nissan Navara 2.5DCI III 190HP
Nissan Pathfinder 2.5DCI III 190HP
Nissan Murano 2.5DCI Z51 190HP
Factory numbers
5303 988 0340
5303 970 0340
5303 988 0202
5303 970 0202
5303 988 0337
5303 988 0210
5303 970 0337
5303 970 0210
53039700345
53039880345
Engines
YD25DDT,
YD25DDTi
OEM number
14411-1AT2A
14411-1AT1A
144111AT2A
144111AT1A
14411-5X01B
14411-5X01A
(If your engine has a different code, please send us a message. We will verify it.)
Matters you should be aware of when placing your order.
-
- The warranty is 12 months without the limit of mileage.
- We need about 7 working days to perform and ship the upgraded turbocharger. The parcels in European Union are shipped via DPD for just 25,00 EURO. DHL Express (airplane shipping) is used for orders besides the EU, it costs 99,00 EURO. The average delivery time is 2-4 working days.
- Every parcel is fully insured.
- If you didn`t find the turbo you need, feel free to contact us. We are able to perform many more upgraded turbochargers than you can find on the site. Our development department works permanently on the new models.
- Do you have a workshop, are you an influencer or seller of tuning parts? We are open to cooperation by offering discounts and refunds.
- During placing your order, please provide information as follows:
-
- the engine code,
- the car model,
- the stock power,
- the VIN number
These details are helpful to make the turbo correctly.
POWER RANGE | 250HP, 300HP |
---|
Be the first to review “YD25DDTi Hybrid Turbo Upgrade 2.5DCI Nissan Navara, Pathfinder, Murano”
You must be logged in to post a review.
There are no reviews yet.