• Home
  • Ford
  • Ranger
  • VI
  • 3.0 EcoBoost Hybrid Twin Turbo Upgrade Ford Ranger Raptor VI, Bronco Raptor
+
Add to Wishlist
Add to Wishlist
Categories:
SKU:

MuchBoost 3.0 EcoBoost Upgraded Turbochargers with Custom Billet Compressor Wheels and a High-Flow Turbine Wheels. They are based on original FoMoCo Turbochargers, which means that the installation is 100%P&P. The turbochargers are meant to work with Ford Ranger Raptor VI and Bronco Raptor with the 3.0 EcoBoost 405/418HP engines.

The turbo delivers up to 165% power (265 extra HP) over the factory specs. It is a great choice for someone looking for some extra HP from their offroad vechicle. MuchBoost turbo allows you to get more from your engine and enjoy it even more than you’ve been so far.

MuchBoost 3.0 EcoBoost 600

Upgraded turbochargers with an estimated 600HP at the crank. List of modifications:

  • Fast spool thanks to Custom Billet Compressor Wheel,
  • Clipped and Lightened  Turbine Wheel,
  • High air-fuel ratio including high peak torque achieved at low engine speeds,
  • Genuine compressor housing,
  • Genuine exhaust manifold,
  • Genuine bearing housing,
  • Original actuator,
  • Precisely machined exhaust & compressor housings + seal plate,
  • Upgraded Journal bearing system that allows holding more boost,
  • The compressor and turbine wheels are balanced separately, and then the whole core is high-speed balanced using VSR balancing machines at speeds similar to the level seen in the vehicle.
 MuchBoost 3.0 EoBoost 670

Upgraded turbochargers with an estimated potential of 670HP  at the crank. Modifications compared to the 600 option are the same except:

  • Enlarged Billet Compressor Wheel,
  • Larger  Turbine Wheel,
  • Precisely machined exhaust housing.
Other significant modifications

The turbo is meant to work with ~670HP In order to reach that level of power, you need to adjust your fuel, exhaust, and cooling systems as well.


A set of gaskets is included with the turbo!



Cars
Ford Ranger Raptor VI – 405HP
Ford Bronco Raptor – 418HP


Factory numbers

N2DZ-6K682-A PS
N2DZ-6K682-B DS

Engines

3.0 EcoBoost


OEM number

N2DZ6K682A PS
N2DZ6K682B DS


(If your engine has a different code, please send us a message. We will verify it.)


Matters you should be aware of when placing your order.
    1. The warranty is 12 months without the limit of mileage.
    2. We need around 2 weeks to perform and ship the upgraded turbocharger. In some complicated cases, it may take up to 3 weeks. Please realize that the turbo upgrades require precision. Especially, the machining process takes a lot of time. We don`t cut the corners. Thank you for understanding. The parcels in the European Union are shipped via DPD for just 25,00 EURO. UPS is used for orders besides the EU, it costs 99,00 EURO and 49,00 to the UK (DHL). The average delivery time is 3-5 working days.
    3. Every parcel is fully insured.
    4. If you didn`t find the turbo you need, feel free to contact us. We are able to perform many more upgraded turbochargers than you can find on the site. Our development department works permanently on the new models.
    5. Do you have a workshop, are you an influencer or seller of tuning parts? We are open to cooperation by offering discounts and refunds.
    6. During placing your order, please provide information as follows:
    • the engine code,
    • the car model,
    • the stock power,
    • the VIN number

These details are helpful to make the turboc orrectly.


Just upgrade option means that we will modify your turbochargers once you sent them to us. The turbo can’t be cracked and must be genuine.

Complete turbo option is for those who want to buy a fully built turbo set ready to install in the car.

POWER RANGE

600HP, 670HP

PRODUCT TYPE*

JUST UPGRADE, COMPLETE TURBO

You May Also Like